POWDER WALLPAPER GLUE

The paste is available in 250g packs for approx. 5-8 rolls of wallpaper or in 500g packs for approx. 10-16 rolls of wallpaper.

Properties

A.S. Universal Paste is reinforced with synthetic resin, very economical, resistant to lime and cement, and has excellent adhesive strength with good correction possibilities.

The paste dries without leaving stains – even on fresh, dry plaster.

Surface preparation

Remove all old wallpaper completely before wallpapering. The surface to be wallpapered must be dry, clean, firm, stable, flat and slightly absorbent. Fill any cracks and holes with filler and prime highly absorbent surfaces according to the table on the packaging.

Application

Stir the contents of the packet thoroughly into cold water (see table on the packaging).

After 2 minutes, stir the A.S. Universal paste vigorously again, then leave to stand for another 15 minutes and stir again – it is then ready for use.

Do not leave the prepared paste to stand for long periods.

Wallpapering

Paste the wallpaper or walls evenly, following the processing instructions, and then hang the wallpaper. For paper wallpaper, softening times may need to be observed.

A.S. Universal Paste has been specially developed for A.S. and livingwalls products (paper, satin, textured and non-woven wallpaper).

Store the paste in a dry place out of the reach of children.